Skip to content Skip to main navigation Skip to footer

USB 2/IEEE 1394 Device Does Not Appear in Partition Work

Problem: 

Your USB 2 or IEEE 1394 device is not shown in the BootIt NG Partition Work window.

Cause: 

The Partition Work window loads before some USB 2 or IEEE 1394 devices can report their presence to BootIt NG.

Solution: 

Beginning with BootIt NG version 1.72, functionality is provided that allows you hold down a Shift key while opening the Partition Work window to force a delay before an attempt is made to search for USB 2 or IEEE 1394 devices.

  • Holding down the left Shift key while opening the Partition Work window forces a delay before the search for USB 2 devices is carried out. The delay will continue for as long as you hold down the left Shift key, up to 10 seconds.

  • Holding down the right Shift key while opening the Partition Work window forces a delay before the search for IEEE 1394 devices is carried out. The delay will continue for as long as you hold down the right Shift key, up to 10 seconds.

Was This Article Helpful?

0